Cement Header
Products & Services

Packaged Products

Broco Stucco Cement

Citadel Custom Color

Types N and S Custom Color Cement
Clinchfield, Georgia

Product Description

Citadel Masonry Cements are produced to meet the criteria of ASTM C91 “Standard Specification for Masonry Cements” for Types N, S, and M (Table 1).

Color selection may be made from the local Citadel Masonry Cement sample kit which is available through your Citadel representative.

Citadel Masonry Cement consists of a mixture of portland cement, limestone, and chemical admixtures to provide plasticizing properties and other enhanced performance attributes. These components are proportioned at the cement plant under controlled conditions to assure product consistency.

Basic Use: Citadel Masonry Cements are used to produce Types N, S, and M mortars as defined in ASTM C270 “Standard Specification for Mortar for Unit Masonry.”

Citadel Masonry Cements when mixed with the recommended volumes of sand (ASTM C144) will produce a mortar that will comply with the requirements of ASTM C270 for both the Proportion Specification (Table 2) and the Property Specification (Table 3).

Size: Citadel Masonry Cements are available in one cubic foot sacks containing a plastic moisture barrier and in bulk via pressurized bulk containers.

Installation More

Mixing: Machine mixing should be used whenever possible. First, add most of the water and half of the sand. Next, add the masonry cement and the rest of the sand. After one minute of continuous mixing, slowly add the rest of the water. Mixing should continue for at least three minutes; extending mixing up to five minutes improves mortar qualities.

No admixtures should be used without written approval. Citadel Masonry Cements have an additive containing a water-repellent component which is interground with the cement during manufacture. No other additives are necessary, unless specified.

Water: All water should be clean and free from organic material and deleterious amounts of dissolved acids, alkalis and salts.

Retempering: To minimize retempering, mortar should not be mixed more than 15 minutes prior to use. Retempering will not adversely affect mortar quality if only evaporated water is replaced. Colored mortar should not be retempered.

Tooling of joints: Tooling of mortar joints increases the density, durability and water tightness of the mortar surface. The moisture content of the mortar when tooled will affect the color; the drier the mortar, the darker its final color.

Specifications More

Table 1. ASTM C91 Masonry Cement

Physical Requirements of Masonry Cements
Masonry Cement Type Compressive Strength Min., psi (MPa) Water Retention Min. % Air Max. %
N 900 (6.2) 70 21
S 2100 (14.5) 70 19
M 2900 (20.0) 70 19

Table 2. Proportion Specification (Parts by Volume)

  Cement Type Fine Aggregate
Mortar Type Masonry Cement Type N Masonry Cement Type S Masonry Cement Type M Masonry Sand
N 1 - - 2¼ - 3
S - 1 - 2¼ - 3
M - - 1 2¼ - 3

Table 3. Property Specification

Mortar Type Compressive Strength Min., psi (MPa) Water Retention Minimum % Air Maximum %
N 750 (5.2) 75 20
S 1800 (12.4) 75 18
M 2500 (17.2) 75 18

*Estimation based on a sand volume of 1 cubic foot of damp loose sand. No allowance made for waste.

Mortar Coverage Estimation More

Mortar Coverage Estimation Sheet

Type S
Unit Pieces per One Bag of Masonry
8x8x16 CMU 33 - 35
12x8x16 CMU 25 - 28

Type N
Unit Pieces per One Bag of Masonry
Modular Brick 125 - 133
Queen Brick 85 - 90
Utility Brick 77 - 81

*All estimates are approximate.

Building Materials Calculator More
Bags needed for brick count
Select block/brick:
Number of blocks/bricks:
Number of bags needed:
Mortar bags needed for block count
Block count
Mortar Bags Required:
(add approx. 5% to the total for waste)
Block required
Length (ft)
Height (ft)
Total Block Required:
(add approx. 5% to the total for waste)
Sand amount needed for block count
Block count
Sand (tons) Required:
(add ½ yard to the total amount you will need)
Block fill
Block count
Block Size
6" 8" 12"
Cubic Yard Required:
(add ½ yard to the total amount you will need)

1-855-CX-BUILD (29-28453)

Request Quote by Product/Application

Product Downloads

Product Resources

Industry Links

Available in Color

Download Color Card

Color Card